STRATIGRAPHIC COORDINATOR SUMMARY Analyzes, evaluates and interprets geological data obtained by various methods and techniques to provide clients with accurate stratigraphic descriptions and interpretations, leading to a correlative framework. ESSENTIAL DUTIES AND RESPONSIBILITIES Measures, describes, computes, analyzes and integrates geologic/scientific data. Must be able to competently evaluate data from a range of stratigraphic disciplines, including but not limited to lithostratigraphy, biostratigraphy and well log analysis. Knowledge of sequence stratigraphy, cyclostratigraphy and/or chemostratigraphy would be considered an advantage. Ability to interpret paleoenvironments from Foraminifera and/or Palynomorphs. Integrates analyses with other geological parameters to generate concise, integrated reports and summary diagrams to a deadline. Communicates well to discuss analytical results and interpretations, and provide information to clients new to a project; assist with the initiation of new studies. Maintains active role in professional and industry associations and organizations. May be required to travel to external locations, within the UK or internationally. Other duties may be assigned. QUALIFICATION REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND/OR EXPERIENCE Bachelor's degree in geology or related field is a minimum, with an emphasis on stratigraphy and up to 10 years' of directly related experience. Knowledge of StrataBugs and log analysis or related software is a plus. Ability to present work performed and results in open forums as required. LANGUAGE SKILLS Ability to effectively present information in one-on one and small group situations to customers, clients, management, and other employees of the organization. Ability to write routine reports and correspondence. Ability to read, analyze and interpret technical and scientific journals, technical procedures, or government regulations. Ability to respond to inquiries or complaints from clients. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals, and calculate area, circumference and volume. Ability to compute rate, ratio and percent and interpret various graphs used to analyze data. Ability to apply mathematical operations to such tasks as determination of test reliability and validity, analysis of variance, correlation techniques, and sampling theory. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to apply principles of logical or scientific thinking to a wide range of geological data problems. Ability to deal with formulas, scientific equations, and graphs. Must be computer literate with working knowledge of MS Office. CERTIFICATES, LICENSES, REGISTRATIONS Valid driver's license. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel objects, tools, or controls; and talk or hear. The employee frequently is required to stand, walk, reach with hands and arms, and taste or smell. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to fumes, or airborne particles. The employee is frequently exposed to toxic or caustic chemicals. The employee occasionally works near moving mechanical parts and is occasionally exposed to risk of radiation. The noise level in the work environment is usually moderate.
29 Jan, 2020
Full Time
STRATIGRAPHIC COORDINATOR SUMMARY Analyzes, evaluates and interprets geological data obtained by various methods and techniques to provide clients with accurate stratigraphic descriptions and interpretations, leading to a correlative framework. ESSENTIAL DUTIES AND RESPONSIBILITIES Measures, describes, computes, analyzes and integrates geologic/scientific data. Must be able to competently evaluate data from a range of stratigraphic disciplines, including but not limited to lithostratigraphy, biostratigraphy and well log analysis. Knowledge of sequence stratigraphy, cyclostratigraphy and/or chemostratigraphy would be considered an advantage. Ability to interpret paleoenvironments from Foraminifera and/or Palynomorphs. Integrates analyses with other geological parameters to generate concise, integrated reports and summary diagrams to a deadline. Communicates well to discuss analytical results and interpretations, and provide information to clients new to a project; assist with the initiation of new studies. Maintains active role in professional and industry associations and organizations. May be required to travel to external locations, within the UK or internationally. Other duties may be assigned. QUALIFICATION REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND/OR EXPERIENCE Bachelor's degree in geology or related field is a minimum, with an emphasis on stratigraphy and up to 10 years' of directly related experience. Knowledge of StrataBugs and log analysis or related software is a plus. Ability to present work performed and results in open forums as required. LANGUAGE SKILLS Ability to effectively present information in one-on one and small group situations to customers, clients, management, and other employees of the organization. Ability to write routine reports and correspondence. Ability to read, analyze and interpret technical and scientific journals, technical procedures, or government regulations. Ability to respond to inquiries or complaints from clients. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals, and calculate area, circumference and volume. Ability to compute rate, ratio and percent and interpret various graphs used to analyze data. Ability to apply mathematical operations to such tasks as determination of test reliability and validity, analysis of variance, correlation techniques, and sampling theory. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to apply principles of logical or scientific thinking to a wide range of geological data problems. Ability to deal with formulas, scientific equations, and graphs. Must be computer literate with working knowledge of MS Office. CERTIFICATES, LICENSES, REGISTRATIONS Valid driver's license. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel objects, tools, or controls; and talk or hear. The employee frequently is required to stand, walk, reach with hands and arms, and taste or smell. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to fumes, or airborne particles. The employee is frequently exposed to toxic or caustic chemicals. The employee occasionally works near moving mechanical parts and is occasionally exposed to risk of radiation. The noise level in the work environment is usually moderate.
Role Summary: The 24/7 UK Service Support Engineer job will perform the following two roles: Global SONDEX Subject Matter Expert (SME) UK-based 24/7 Service Support Engineer (24/7SE) Both roles provide direct support to the Field Operations, Product Development, Direct Sales, Supply Chain, Central Product Line Management, Training & Development teams. Essential Responsibilities: As the Global SONDEX Systems and Services - SME: Respond all BKR field operations service support requests related to SONDEX systems and services, regardless of how they are submitted Provide on-demand technical support to the BKR technology centers on SONDEX operations aspects Support the resolution of applications or geoscience SONDEX systems and services related issues Support the resolutions of issues related to supply chain and manufacturing of SONDEX equipment Support the Product Manager and Product Champion in development projects and new SONDEX service deployments Qualifications/Requirements: Extensive experience with the planning and execution of wireline jobs that include the use of SONDEX logging and well intervention tools Formal training in the operations and applicability of SONDEX logging and well intervention tools Fully proficient on the English language Proficient user of computers and MS Office software Major experience in the oil and gas service industry College or equivalent degree on science or an engineering discipline or equivalent knowledge or experience Preferably with long international assignments history Preferable with a degree or formal training on reservoir engineering subjects Desired Characteristics: Willing to work flexible schedule and travel at short notice Self-driven and capable of prioritizing tasks/time/travel Good communicator and presenter Capable of working alone as well as in small teams Locations: Farnborough, UK This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more
29 Jan, 2020
Full Time
Role Summary: The 24/7 UK Service Support Engineer job will perform the following two roles: Global SONDEX Subject Matter Expert (SME) UK-based 24/7 Service Support Engineer (24/7SE) Both roles provide direct support to the Field Operations, Product Development, Direct Sales, Supply Chain, Central Product Line Management, Training & Development teams. Essential Responsibilities: As the Global SONDEX Systems and Services - SME: Respond all BKR field operations service support requests related to SONDEX systems and services, regardless of how they are submitted Provide on-demand technical support to the BKR technology centers on SONDEX operations aspects Support the resolution of applications or geoscience SONDEX systems and services related issues Support the resolutions of issues related to supply chain and manufacturing of SONDEX equipment Support the Product Manager and Product Champion in development projects and new SONDEX service deployments Qualifications/Requirements: Extensive experience with the planning and execution of wireline jobs that include the use of SONDEX logging and well intervention tools Formal training in the operations and applicability of SONDEX logging and well intervention tools Fully proficient on the English language Proficient user of computers and MS Office software Major experience in the oil and gas service industry College or equivalent degree on science or an engineering discipline or equivalent knowledge or experience Preferably with long international assignments history Preferable with a degree or formal training on reservoir engineering subjects Desired Characteristics: Willing to work flexible schedule and travel at short notice Self-driven and capable of prioritizing tasks/time/travel Good communicator and presenter Capable of working alone as well as in small teams Locations: Farnborough, UK This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more
Role Summary: Field Specialist - Surface Logging Services (SLS) Essential Responsibilities: Perform Drilling and Engineering monitoring duties Perform engineering programs as requested by client but not essential Input at the wellsite of geological and engineering data Collection of rock samples, packaging, describing it under the microscope and updated the mud-log. Ensure QA of data is of the required level Ensure correct operation and assist in maintenance of Baker Hughes SLS equipment, as per recommended maintenance schedules for cabin systems and surface sensors Prepare, and QA, Surface Logging Well reports Report Field failures through the FRACAS reporting system Ensure effective communication with other members of the crew, client representatives and onshore coordinator Ensure correct levels of equipment stocks at the wellsite are maintained Conduct all business activities in accordance with Baker Hughes HSE policies, ensure all PPE/Certification is valid & suitable for offshore work. Actively participate in Baker Hughes and client HS&E Policies at all times. Performing and participating in pre-job tool box talks at the rigsite Qualifications/Requirements: Bachelor Degree in related subject (Geology or Earth Sciences) Experience working as a mudlogger / data engineer is preferred but not essential Flexible & adaptable approach Detailed & analytic approach Computer literacy Strong communication and inter-personal skills and demonstrated excellent customer awareness Good technical aptitude and problem solving skills Ability to take direction and work efficiently in teams Must be prepared to work 12 hour day and/or night shifts as required Convenient access to a domestic airport or rail link is essential for travel. Desired Characteristics: Willing to take on responsibility and be accountable for their action. A Good team player. Excellent communication skills in both written and speaking in English. Excellent computer skills. On-going role in Health, Safety & Environment compliance. Some experience as a Data Engineer, Mud Logger or Logging Geologist would be beneficial but is not essential. Willing to work as a logger / data engineer if required to cover holiday period. Location: Mainly UK, but could be rotated in Europe region.(Netherlands, Norway) This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization. Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more
29 Jan, 2020
Full Time
Role Summary: Field Specialist - Surface Logging Services (SLS) Essential Responsibilities: Perform Drilling and Engineering monitoring duties Perform engineering programs as requested by client but not essential Input at the wellsite of geological and engineering data Collection of rock samples, packaging, describing it under the microscope and updated the mud-log. Ensure QA of data is of the required level Ensure correct operation and assist in maintenance of Baker Hughes SLS equipment, as per recommended maintenance schedules for cabin systems and surface sensors Prepare, and QA, Surface Logging Well reports Report Field failures through the FRACAS reporting system Ensure effective communication with other members of the crew, client representatives and onshore coordinator Ensure correct levels of equipment stocks at the wellsite are maintained Conduct all business activities in accordance with Baker Hughes HSE policies, ensure all PPE/Certification is valid & suitable for offshore work. Actively participate in Baker Hughes and client HS&E Policies at all times. Performing and participating in pre-job tool box talks at the rigsite Qualifications/Requirements: Bachelor Degree in related subject (Geology or Earth Sciences) Experience working as a mudlogger / data engineer is preferred but not essential Flexible & adaptable approach Detailed & analytic approach Computer literacy Strong communication and inter-personal skills and demonstrated excellent customer awareness Good technical aptitude and problem solving skills Ability to take direction and work efficiently in teams Must be prepared to work 12 hour day and/or night shifts as required Convenient access to a domestic airport or rail link is essential for travel. Desired Characteristics: Willing to take on responsibility and be accountable for their action. A Good team player. Excellent communication skills in both written and speaking in English. Excellent computer skills. On-going role in Health, Safety & Environment compliance. Some experience as a Data Engineer, Mud Logger or Logging Geologist would be beneficial but is not essential. Willing to work as a logger / data engineer if required to cover holiday period. Location: Mainly UK, but could be rotated in Europe region.(Netherlands, Norway) This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization. Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more
Role Summary: The successful candidate will join BHGE Process & Pipeline Services to supervise shifts and scopes of work of varying sizes. They will be involved with Purging, Leak Testing, Foam Inerting and Pipe Freezing. Generating procedures using Bluebeam. Office based (Aberdeen, UK) engineering duties such as generating procedures and mobilisation lists will be required. Essential Responsibilities: Ensure timely execution of orders, instructions and directions from the Department Manager. Participate in pre-job briefing and ensure familiarisation with the workscope. Supervise shifts and work scopes, ensuring that all operations are carried out as per procedure and as per the Company's HSE and Operating Procedures. Ensure that all subordinates are fully briefed on the work scope, their duties, the risks and HSE procedures and requirements. Prepare all required Field Paperwork, including weekly reports and weekly timesheets. Maintain effective communication and collaboration with the client representative and the office. Monitor instruments to assure proper flow, pressure and operational conditions. Ensure that operation of equipment is carried out as per the Company's HSE and Operating Procedures. Ensure that the daily maintenance of equipment is carried out and ensure the equipment is ready for a job at all times. Carry-out the operation of equipment as required as per the Company's HSE and Operating Procedures. Contribute to the process of continuous training and qualification improvement of employees within the Department. Train subordinates on equipment, job procedures and safety regulations. Perform other assigned duties as required. Qualifications/Requirements: A degree (or equivalent) in an Engineering subject is desired but not essential Experience and demonstrable competencies in Purging, Leak Testing, Foam- Inerting & Pipe Freezing is essential. Bolting experience and ECITB Certification would be desirable. Experience of developing Procedures to a high standard is preferred Offshore experience is essential for this role. Good computer skills. Must be a self-starter and natural leader who is capable of working with little to no supervision. Excellent safety attitude is a must. Must participate in all Company safety programs and adhere to all policies. Ability to commit to travel at short-notice as and when required Locations: Aberdeen, UK- North Sea/Continental Europe This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more
29 Jan, 2020
Full Time
Role Summary: The successful candidate will join BHGE Process & Pipeline Services to supervise shifts and scopes of work of varying sizes. They will be involved with Purging, Leak Testing, Foam Inerting and Pipe Freezing. Generating procedures using Bluebeam. Office based (Aberdeen, UK) engineering duties such as generating procedures and mobilisation lists will be required. Essential Responsibilities: Ensure timely execution of orders, instructions and directions from the Department Manager. Participate in pre-job briefing and ensure familiarisation with the workscope. Supervise shifts and work scopes, ensuring that all operations are carried out as per procedure and as per the Company's HSE and Operating Procedures. Ensure that all subordinates are fully briefed on the work scope, their duties, the risks and HSE procedures and requirements. Prepare all required Field Paperwork, including weekly reports and weekly timesheets. Maintain effective communication and collaboration with the client representative and the office. Monitor instruments to assure proper flow, pressure and operational conditions. Ensure that operation of equipment is carried out as per the Company's HSE and Operating Procedures. Ensure that the daily maintenance of equipment is carried out and ensure the equipment is ready for a job at all times. Carry-out the operation of equipment as required as per the Company's HSE and Operating Procedures. Contribute to the process of continuous training and qualification improvement of employees within the Department. Train subordinates on equipment, job procedures and safety regulations. Perform other assigned duties as required. Qualifications/Requirements: A degree (or equivalent) in an Engineering subject is desired but not essential Experience and demonstrable competencies in Purging, Leak Testing, Foam- Inerting & Pipe Freezing is essential. Bolting experience and ECITB Certification would be desirable. Experience of developing Procedures to a high standard is preferred Offshore experience is essential for this role. Good computer skills. Must be a self-starter and natural leader who is capable of working with little to no supervision. Excellent safety attitude is a must. Must participate in all Company safety programs and adhere to all policies. Ability to commit to travel at short-notice as and when required Locations: Aberdeen, UK- North Sea/Continental Europe This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more
About Us: At Baker Hughes, we are transforming the future of energy. With operations in over 120 countries, we are developing and deploying industry-leading technologies and services to take energy forward. For more than a century, our inventions have revolutionized energy. Today, we are bringing our expertise to make oil and gas safer, cleaner, and more efficient. Our people are the trusted experts, relied on to solve customer challenges big and small. We invest in the health and well-being of our workforce, train and reward talent, and develop leaders at all levels to bring out the best in each other. We believe in creating an environment of diversity and inclusion, without bias. We know we are better when all of our people are developed, engaged, and able to bring their whole authentic selves to work. We're makers, inventors, and leaders who aren't afraid of the tough challenges. We believe pushing boundaries will help to lead the way for a new energy future. Role Summary: Baker Hughes currently have an opportunity for an experienced Field Service Technician to support our UK operations. To be a part of a team of Surface Wellhead and X/Tree experts supporting major Oil & Gas operators, while joining a company with endless progression opportunities. This is an offshore staff based role, working on an ad-hoc basis, providing technical direction and assistance to the customer in the installation, operation, maintenance and repair of Baker Hughes Pressure Control products. Essential Responsibilities: The successful candidate must be able to: Provide technical onsite direction and assistance to the customer in the operation, maintenance, repair and installation of Baker Hughes products. Provide communication to onshore support and the customer regarding all program activities and problems through accurate, regular and timely reports. Qualifications/Requirements: **Previous Experience working with Surface Equipment Essential, candidates without this experience will not be considered** We are looking for candidates who can bring to us their experience in the installation, repair and maintenance of Surface Trees, Wellheads and associated equipment, in an offshore environment. The desired candidate will be the sole Pressure Control representative offshore and will be liaising direct with the customer. As the role is of an Ad-hoc nature, you will be expected to be flexible in your approach to irregular working pattern. Qualification in Mechanical Engineering is preferable or equivalent knowledge and experience Apprenticeship in relevant discipline or equivalent knowledge and experience Significant of experience, including: Drilling / Installing and maintaining Surface Wellheads and X/Tree's (Offshore): HPHT; MSNT; NT2; Able to carry out Field Repair on all VG Products: (list not extensive) Replace Valve Seats & Gates (On location) Carry out Wellhead Upgrades as per engineering PRPs / FSM Able to fault diagnose and complete field repair of valve actuator(s) (CH/AVA) Ability to work effectively with minimum supervision Understand Technical drawings Check over equipment prior to it going offshore Competency focused Desired Characteristics: Have a proactive approach to allocated task, taking ownership of all aspects of the job: Tooling; Spares; Reviewing job history / lessons learned; Review FSM's / PRP's. Willing to work in the office or onshore in Altens as and when requested by the company Be customer focused and results driven Strong organizational skills Strong oral and written communication skills Solid interpersonal and leadership skill Solid understanding of offshore environment Locations: Aberdeen This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more
29 Jan, 2020
Full Time
About Us: At Baker Hughes, we are transforming the future of energy. With operations in over 120 countries, we are developing and deploying industry-leading technologies and services to take energy forward. For more than a century, our inventions have revolutionized energy. Today, we are bringing our expertise to make oil and gas safer, cleaner, and more efficient. Our people are the trusted experts, relied on to solve customer challenges big and small. We invest in the health and well-being of our workforce, train and reward talent, and develop leaders at all levels to bring out the best in each other. We believe in creating an environment of diversity and inclusion, without bias. We know we are better when all of our people are developed, engaged, and able to bring their whole authentic selves to work. We're makers, inventors, and leaders who aren't afraid of the tough challenges. We believe pushing boundaries will help to lead the way for a new energy future. Role Summary: Baker Hughes currently have an opportunity for an experienced Field Service Technician to support our UK operations. To be a part of a team of Surface Wellhead and X/Tree experts supporting major Oil & Gas operators, while joining a company with endless progression opportunities. This is an offshore staff based role, working on an ad-hoc basis, providing technical direction and assistance to the customer in the installation, operation, maintenance and repair of Baker Hughes Pressure Control products. Essential Responsibilities: The successful candidate must be able to: Provide technical onsite direction and assistance to the customer in the operation, maintenance, repair and installation of Baker Hughes products. Provide communication to onshore support and the customer regarding all program activities and problems through accurate, regular and timely reports. Qualifications/Requirements: **Previous Experience working with Surface Equipment Essential, candidates without this experience will not be considered** We are looking for candidates who can bring to us their experience in the installation, repair and maintenance of Surface Trees, Wellheads and associated equipment, in an offshore environment. The desired candidate will be the sole Pressure Control representative offshore and will be liaising direct with the customer. As the role is of an Ad-hoc nature, you will be expected to be flexible in your approach to irregular working pattern. Qualification in Mechanical Engineering is preferable or equivalent knowledge and experience Apprenticeship in relevant discipline or equivalent knowledge and experience Significant of experience, including: Drilling / Installing and maintaining Surface Wellheads and X/Tree's (Offshore): HPHT; MSNT; NT2; Able to carry out Field Repair on all VG Products: (list not extensive) Replace Valve Seats & Gates (On location) Carry out Wellhead Upgrades as per engineering PRPs / FSM Able to fault diagnose and complete field repair of valve actuator(s) (CH/AVA) Ability to work effectively with minimum supervision Understand Technical drawings Check over equipment prior to it going offshore Competency focused Desired Characteristics: Have a proactive approach to allocated task, taking ownership of all aspects of the job: Tooling; Spares; Reviewing job history / lessons learned; Review FSM's / PRP's. Willing to work in the office or onshore in Altens as and when requested by the company Be customer focused and results driven Strong organizational skills Strong oral and written communication skills Solid interpersonal and leadership skill Solid understanding of offshore environment Locations: Aberdeen This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more
VAC-66959 Our client is a multinational power management company who are recruiting for a Product Manager to work in the Leicestershire area on a staff basis The role: Whilst being responsible for assisting the development and implementation of strategic product plans you will be involved in truly international opportunities. We would consider candidates holding either a Commercial or Engineering degree (electrical would be preferred), ideally with product management experience, or a sound understanding of what bringing a technical product to market entails. Qualifications - Commercial or Engineering degree - Product management experience preferable, or 2 to 5 years' experience in a techno-commercial role with sound understanding of what bringing a product to market entails.
29 Jan, 2020
Full Time
VAC-66959 Our client is a multinational power management company who are recruiting for a Product Manager to work in the Leicestershire area on a staff basis The role: Whilst being responsible for assisting the development and implementation of strategic product plans you will be involved in truly international opportunities. We would consider candidates holding either a Commercial or Engineering degree (electrical would be preferred), ideally with product management experience, or a sound understanding of what bringing a technical product to market entails. Qualifications - Commercial or Engineering degree - Product management experience preferable, or 2 to 5 years' experience in a techno-commercial role with sound understanding of what bringing a product to market entails.
Rotational Offshore Production Chemist - Full time Lab management duties based on an operator site of a busy platform. Responsible for: Stock management, chemical injection, water & fluid sampling, decanting, bottle testing, demulsifying and troubleshooting problems. In addition, previous knowledge of client/account management and some HSE responsibilities would be ideal. You must have UK / EU passport. A minimum of 2 - 5 years of previous offshore Chemistry experience. If you are interested in being considered, please send CV's to Paul Stanbridge at Fleet Oil. Please note, we expect a high level of interest in the role and may not be able to reply to each applicant.
29 Jan, 2020
Full Time
Rotational Offshore Production Chemist - Full time Lab management duties based on an operator site of a busy platform. Responsible for: Stock management, chemical injection, water & fluid sampling, decanting, bottle testing, demulsifying and troubleshooting problems. In addition, previous knowledge of client/account management and some HSE responsibilities would be ideal. You must have UK / EU passport. A minimum of 2 - 5 years of previous offshore Chemistry experience. If you are interested in being considered, please send CV's to Paul Stanbridge at Fleet Oil. Please note, we expect a high level of interest in the role and may not be able to reply to each applicant.
Eden Scott's client. A leading provider of Surface Pressure Control Services to the Oil & Gas Industry is currently hiring contractors in volume for 2020 Campaigns. Our client is seeking those with experience maintaining, installing and replacing surface well head equipment and is currently managing campaigns on platforms and drilling rigs in the UK North Sea. This position would suit a LTD Company contractor seeking to add work into their 2020 Pipeline and add another client to their list of customers. The position will also suit someone who is currently permanent but looking to pick and choose when they work over the course of the year. We have positions available for Maintenance and Installation campaigns with day rates ranging from £350 per day to £500 per day depending on the experience you have and the type of work you will be engaged in. Requirements: Experienced with Surface Wellhead Equipment or Surface Xmas Trees Experience running Tubing Hangers beneficial Experience Maintaining Surface Wellhead equipment or Surface Xmas Trees Full UK North Sea Offshore Certification LTD Company set up Ideally located around the Aberdeenshire area Drilling - Must be competent in the installation of Surface Wellheads (Conventional/Multi-Bowl) using the associated running tools with Casing/Tubing Hangers . Previous experience installing and testing MS Seals/Pack-Offs/Annulus Seals is a must. Must be familiar with NT-2 or radial bolt connectors. Proficient in torqueing/pressure testing/small bore fitting and the necessary certification would be a bonus. Maintenance - This includes 3 - 6 - 12 Monthly maintenance campaigns. Pressure test/in flow test surface wellhead equipment. This also includes greasing/functioning Wellhead Valves and X-mas Tree Valves. Must be competent in using stinger tools (Pacson/GSP/Bleeder Tools) admin skills and paperwork must be strong along with the hands on aspect of the role. Our clients work with conventional wellheads and unitised wellhead systems. They also work with slab gate and split gate valves.
29 Jan, 2020
Full Time
Eden Scott's client. A leading provider of Surface Pressure Control Services to the Oil & Gas Industry is currently hiring contractors in volume for 2020 Campaigns. Our client is seeking those with experience maintaining, installing and replacing surface well head equipment and is currently managing campaigns on platforms and drilling rigs in the UK North Sea. This position would suit a LTD Company contractor seeking to add work into their 2020 Pipeline and add another client to their list of customers. The position will also suit someone who is currently permanent but looking to pick and choose when they work over the course of the year. We have positions available for Maintenance and Installation campaigns with day rates ranging from £350 per day to £500 per day depending on the experience you have and the type of work you will be engaged in. Requirements: Experienced with Surface Wellhead Equipment or Surface Xmas Trees Experience running Tubing Hangers beneficial Experience Maintaining Surface Wellhead equipment or Surface Xmas Trees Full UK North Sea Offshore Certification LTD Company set up Ideally located around the Aberdeenshire area Drilling - Must be competent in the installation of Surface Wellheads (Conventional/Multi-Bowl) using the associated running tools with Casing/Tubing Hangers . Previous experience installing and testing MS Seals/Pack-Offs/Annulus Seals is a must. Must be familiar with NT-2 or radial bolt connectors. Proficient in torqueing/pressure testing/small bore fitting and the necessary certification would be a bonus. Maintenance - This includes 3 - 6 - 12 Monthly maintenance campaigns. Pressure test/in flow test surface wellhead equipment. This also includes greasing/functioning Wellhead Valves and X-mas Tree Valves. Must be competent in using stinger tools (Pacson/GSP/Bleeder Tools) admin skills and paperwork must be strong along with the hands on aspect of the role. Our clients work with conventional wellheads and unitised wellhead systems. They also work with slab gate and split gate valves.
Our Client is looking for a Production Chemist, on a contract basis, location in Aberdeen. RESPONSIBILITIES Proactively provide specialist advice on oilfield production chemistry and flow assurance related matters to prevent operational upsets and solve problems Manage the performance of production chemicals on company facilities, maintain associated chemical management documentation and assure injection compliance in the field Develop direct laboratory/ field trials to assess new chemicals or improve treatments Provide Production Chemistry input to the design and operation of development and decommissioning projects Specific tasks associated with the principal accountabilities include (but not limited to); Attending relevant facility and multi-discipline meetings and liaising with offshore facility teams Generating monthly production chemical reports and communicating chemical performance against KPIs Scale management via produced water surveillance and organizing scale squeeze/dissolver treatments Requesting chemical permit variations Qualifying new production chemicals Initiating the Management of Change process Organizing appropriate laboratory analyses and interpreting their results Liaising with company technical experts and chemical suppliers to troubleshoot Production Chemistry problems Provide relevant fluid property information to the business Administering the company Chemical Approval process Execute work with a continuous improvement mindset REQUIREMENTS Minimum BSc or equivalent degree in Chemistry, Chemical Engineering or Petroleum Engineering Experience in oilfield process chemistry operations or development projects. Working knowledge of liquid hydrocarbon and gas processing/operations In depth knowledge of oilfield flow assurance issues and oilfield chemical treatments is essential Ability to interface and communicate with other technical disciplines SQUEEZE modelling and thermodynamic scale, wax and hydrate modelling would be beneficial
29 Jan, 2020
Full Time
Our Client is looking for a Production Chemist, on a contract basis, location in Aberdeen. RESPONSIBILITIES Proactively provide specialist advice on oilfield production chemistry and flow assurance related matters to prevent operational upsets and solve problems Manage the performance of production chemicals on company facilities, maintain associated chemical management documentation and assure injection compliance in the field Develop direct laboratory/ field trials to assess new chemicals or improve treatments Provide Production Chemistry input to the design and operation of development and decommissioning projects Specific tasks associated with the principal accountabilities include (but not limited to); Attending relevant facility and multi-discipline meetings and liaising with offshore facility teams Generating monthly production chemical reports and communicating chemical performance against KPIs Scale management via produced water surveillance and organizing scale squeeze/dissolver treatments Requesting chemical permit variations Qualifying new production chemicals Initiating the Management of Change process Organizing appropriate laboratory analyses and interpreting their results Liaising with company technical experts and chemical suppliers to troubleshoot Production Chemistry problems Provide relevant fluid property information to the business Administering the company Chemical Approval process Execute work with a continuous improvement mindset REQUIREMENTS Minimum BSc or equivalent degree in Chemistry, Chemical Engineering or Petroleum Engineering Experience in oilfield process chemistry operations or development projects. Working knowledge of liquid hydrocarbon and gas processing/operations In depth knowledge of oilfield flow assurance issues and oilfield chemical treatments is essential Ability to interface and communicate with other technical disciplines SQUEEZE modelling and thermodynamic scale, wax and hydrate modelling would be beneficial
The Upstream segment has launched an innovation-based centre of excellence in chemistry, physical science, fluids, dynamic displacement, and rock characterisation with an associated laboratory capability. The Upstream Centre for Applied Science UCAS), provides new solutions to current and future challenges in the extraction and production of oil and gas from both conventional and unconventional (shale, tight) reservoirs and actively supports the energy transition through technical support of carbon capture, usage and storage, and hydrogen generation. As the Director of UCAS, you will lead this new and exciting organisation, which integrates professionals in chemistry, rock imaging, flow in porous media, physical measurements, and enhanced oil recovery, and reports to the Head of Upstream Technology. You will establish agile and innovative ways of working using the newly built chemistry laboratories. Delivery comprises both "high value" and high-end technical support to the Global Wells Organisation, Reservoir Development regional teams, and forefront R&D across the full range of the upstream business. Additionally, you will build key relationships with other segments and important external partners such as BP Institute (Cambridge), BP's strategic universities, and the International Centre for Advanced Materials (ICAM) to utilise and qualify science and technology to seek solutions to the business challenges. You will have line responsibility for a technical team of around thirty-five people. The position holds operational and safety responsibilities for the laboratory and comes with an exciting diverse technology portfolio. Key Accountabilities Own and lead safe, ethical & compliant operation of the UCAS Laboratories in Sunbury including operating management system and the BP Sunbury Radiation Officer. Set the forward strategy for the Upstream Centre for Applied Science. Integrate chemistry, imaging, flow in porous media, simulation, dynamic displacement and formulation expertise, enabling innovative and agile delivery of solutions across BP's upstream business and technology development organisation. Put in place differentiated improvements to build technical capabilities in BP, ICAM, BP Institute Cambridge, partner universities, specialist 3rd parties, and enable development of BP staff capability and expertise. Ensure timely and efficient delivery of high-end, proprietary, license to operate (LTO) technical laboratory service to Upstream regional teams. Prioritisation and maintenance of the backlog of such work will be the responsibility of GWO and RD Delivery managers ("Product Owners"), with whom delivery will be agreed. Deliver chemistry, fluids, and imaging capability, and components of the UT R&D programme milestones within budget. Collaborate with the business to enable technology delivery to build the development and delivery of innovative technical solutions fully aligned to the business priorities, and business value Develop and sustain the talent within your team Hold and manage relationships with Downstream (Refining & Formulated Products) technology, Group Research, ICAM, BPI, and BP Strategic University Partners capability in chemical and applied science in support of Upstream business delivery. Represent upstream technology at BP's science and engineering council. Essential Education Degree in a science based subject or equivalent experience Essential Skills and Experience Experience in leading technology delivery organisations, including sourcing, qualification and delivery of products into the businesses. Demonstrated track record in setting clear direction and vision, and delivery of a diverse portfolio of value adding technical activities across multiple interfaces. Strong networking skills, and ability to build meaningful business relationships. Ability to communicate and advise to all levels in the organisation. Ability to meld together and motivate a team of highly technical professionals Strong "customer service" oriented attitude Ability to quickly embed and exploit new ways of working to drive efficiency and innovation.
29 Jan, 2020
Full Time
The Upstream segment has launched an innovation-based centre of excellence in chemistry, physical science, fluids, dynamic displacement, and rock characterisation with an associated laboratory capability. The Upstream Centre for Applied Science UCAS), provides new solutions to current and future challenges in the extraction and production of oil and gas from both conventional and unconventional (shale, tight) reservoirs and actively supports the energy transition through technical support of carbon capture, usage and storage, and hydrogen generation. As the Director of UCAS, you will lead this new and exciting organisation, which integrates professionals in chemistry, rock imaging, flow in porous media, physical measurements, and enhanced oil recovery, and reports to the Head of Upstream Technology. You will establish agile and innovative ways of working using the newly built chemistry laboratories. Delivery comprises both "high value" and high-end technical support to the Global Wells Organisation, Reservoir Development regional teams, and forefront R&D across the full range of the upstream business. Additionally, you will build key relationships with other segments and important external partners such as BP Institute (Cambridge), BP's strategic universities, and the International Centre for Advanced Materials (ICAM) to utilise and qualify science and technology to seek solutions to the business challenges. You will have line responsibility for a technical team of around thirty-five people. The position holds operational and safety responsibilities for the laboratory and comes with an exciting diverse technology portfolio. Key Accountabilities Own and lead safe, ethical & compliant operation of the UCAS Laboratories in Sunbury including operating management system and the BP Sunbury Radiation Officer. Set the forward strategy for the Upstream Centre for Applied Science. Integrate chemistry, imaging, flow in porous media, simulation, dynamic displacement and formulation expertise, enabling innovative and agile delivery of solutions across BP's upstream business and technology development organisation. Put in place differentiated improvements to build technical capabilities in BP, ICAM, BP Institute Cambridge, partner universities, specialist 3rd parties, and enable development of BP staff capability and expertise. Ensure timely and efficient delivery of high-end, proprietary, license to operate (LTO) technical laboratory service to Upstream regional teams. Prioritisation and maintenance of the backlog of such work will be the responsibility of GWO and RD Delivery managers ("Product Owners"), with whom delivery will be agreed. Deliver chemistry, fluids, and imaging capability, and components of the UT R&D programme milestones within budget. Collaborate with the business to enable technology delivery to build the development and delivery of innovative technical solutions fully aligned to the business priorities, and business value Develop and sustain the talent within your team Hold and manage relationships with Downstream (Refining & Formulated Products) technology, Group Research, ICAM, BPI, and BP Strategic University Partners capability in chemical and applied science in support of Upstream business delivery. Represent upstream technology at BP's science and engineering council. Essential Education Degree in a science based subject or equivalent experience Essential Skills and Experience Experience in leading technology delivery organisations, including sourcing, qualification and delivery of products into the businesses. Demonstrated track record in setting clear direction and vision, and delivery of a diverse portfolio of value adding technical activities across multiple interfaces. Strong networking skills, and ability to build meaningful business relationships. Ability to communicate and advise to all levels in the organisation. Ability to meld together and motivate a team of highly technical professionals Strong "customer service" oriented attitude Ability to quickly embed and exploit new ways of working to drive efficiency and innovation.
Role Summary: BHGE currently have an opportunity for an experienced Field Service Technician to support our UK operations. To be a part of a team of Surface Wellhead and X/Tree experts supporting major Oil & Gas operators, while joining a company with endless progression opportunities. This is an offshore staff based role, working on an ad-hoc basis, providing technical direction and assistance to the customer in the installation, operation, maintenance and repair of BHGE Pressure Control products. Essential Responsibilities: The successful candidate must be able to: Provide technical onsite direction and assistance to the customer in the operation, maintenance, repair and installation of BHGE products. Provide communication to onshore support and the customer regarding all program activities and problems through accurate, regular and timely reports. **Previous Experience working with Surface Equipment Essential, candidates without this experience will not be considered** Qualifications/Requirements: We are looking for candidates who can bring to us their experience in the installation, repair and maintenance of Surface Trees, Wellheads and associated equipment, in an offshore environment. The desired candidate will be the sole Pressure Control representative offshore and will be liaising direct with the customer. As the role is of an Ad-hoc nature, you will be expected to be flexible in your approach to irregular working pattern. Qualification in Mechanical Engineering is preferable or equivalent knowledge and experience Apprenticeship in relevant discipline or equivalent knowledge and experience Significant of experience, including: Drilling / Installing and maintaining Surface Wellheads and X/Tree's (Offshore): HPHT; MSNT; NT2; Able to carry out Field Repair on all VG Products: (list not extensive) Replace Valve Seats & Gates (On location) Carry out Wellhead Upgrades as per engineering PRPs / FSM Able to fault diagnose and complete field repair of valve actuator(s) (CH/AVA) Ability to work effectively with minimum supervision Understand Technical drawings Check over equipment prior to it going offshore Competency focused Baker Hughes, a GE company is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more Desired Characteristics: Have a proactive approach to allocated task, taking ownership of all aspects of the job: Tooling; Spares; Reviewing job history / lessons learned; Review FSM's / PRP's. Willing to work in the office or onshore in Altens as and when requested by the company Be customer focused and results driven Strong organizational skills Strong oral and written communication skills Solid interpersonal and leadership skill Solid understanding of offshore environment Locations: Aberdeen This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more
29 Jan, 2020
Full Time
Role Summary: BHGE currently have an opportunity for an experienced Field Service Technician to support our UK operations. To be a part of a team of Surface Wellhead and X/Tree experts supporting major Oil & Gas operators, while joining a company with endless progression opportunities. This is an offshore staff based role, working on an ad-hoc basis, providing technical direction and assistance to the customer in the installation, operation, maintenance and repair of BHGE Pressure Control products. Essential Responsibilities: The successful candidate must be able to: Provide technical onsite direction and assistance to the customer in the operation, maintenance, repair and installation of BHGE products. Provide communication to onshore support and the customer regarding all program activities and problems through accurate, regular and timely reports. **Previous Experience working with Surface Equipment Essential, candidates without this experience will not be considered** Qualifications/Requirements: We are looking for candidates who can bring to us their experience in the installation, repair and maintenance of Surface Trees, Wellheads and associated equipment, in an offshore environment. The desired candidate will be the sole Pressure Control representative offshore and will be liaising direct with the customer. As the role is of an Ad-hoc nature, you will be expected to be flexible in your approach to irregular working pattern. Qualification in Mechanical Engineering is preferable or equivalent knowledge and experience Apprenticeship in relevant discipline or equivalent knowledge and experience Significant of experience, including: Drilling / Installing and maintaining Surface Wellheads and X/Tree's (Offshore): HPHT; MSNT; NT2; Able to carry out Field Repair on all VG Products: (list not extensive) Replace Valve Seats & Gates (On location) Carry out Wellhead Upgrades as per engineering PRPs / FSM Able to fault diagnose and complete field repair of valve actuator(s) (CH/AVA) Ability to work effectively with minimum supervision Understand Technical drawings Check over equipment prior to it going offshore Competency focused Baker Hughes, a GE company is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more Desired Characteristics: Have a proactive approach to allocated task, taking ownership of all aspects of the job: Tooling; Spares; Reviewing job history / lessons learned; Review FSM's / PRP's. Willing to work in the office or onshore in Altens as and when requested by the company Be customer focused and results driven Strong organizational skills Strong oral and written communication skills Solid interpersonal and leadership skill Solid understanding of offshore environment Locations: Aberdeen This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more
Role Summary: Baker Hughes is seeking a Field Specialist - Intelligent Production Systems (IPS) supporting the Product Line as part of our European Geomarket operations. This is ultimately a field position and involves interacting with various Engineering, AMO, Quality, HSE and Supply Chain functions onshore and offshore however the first 6 months will be spent in the workshop in Aberdeen. Essential Responsibilities: Under broad direction becomes proficient in running most Intelligent Production Systems applications including down hole gauge and chemical injection systems Continues to expand and apply application knowledge and expertise to include applications of increasing complexity and/or risk in Intelligent Production Systems and/or other product groups Ensures supplied equipment is compatible with all other equipment used for job Provides front-line support with customer and accurately completes all paperwork prior to or upon completion of job Uses experience and knowledge of applications to ensure products and services are of highest quality Advises and trouble shoots on Intelligent Production Systems issues in the district Conducts on-the-job training as required Handles special projects as assigned Conducts all business activities in accordance with BH HSE policies, Legal Compliance requirements and BH Core Values Qualifications/Requirements: HND or recognized Apprenticeship in mechanical, electrical or electronic discipline is essential Basic knowledge of drilling and completion techniques and drilling/work over rig operations is preferred but not essential. Basic knowledge of Fibre Optics is advantageous Ability to work well and communicate well with others Willingness to travel, often at short notice to site or offshore Desired Characteristics: Ability to work well and communicate well with others. Locations: Aberdeen, Scotland · This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more
29 Jan, 2020
Full Time
Role Summary: Baker Hughes is seeking a Field Specialist - Intelligent Production Systems (IPS) supporting the Product Line as part of our European Geomarket operations. This is ultimately a field position and involves interacting with various Engineering, AMO, Quality, HSE and Supply Chain functions onshore and offshore however the first 6 months will be spent in the workshop in Aberdeen. Essential Responsibilities: Under broad direction becomes proficient in running most Intelligent Production Systems applications including down hole gauge and chemical injection systems Continues to expand and apply application knowledge and expertise to include applications of increasing complexity and/or risk in Intelligent Production Systems and/or other product groups Ensures supplied equipment is compatible with all other equipment used for job Provides front-line support with customer and accurately completes all paperwork prior to or upon completion of job Uses experience and knowledge of applications to ensure products and services are of highest quality Advises and trouble shoots on Intelligent Production Systems issues in the district Conducts on-the-job training as required Handles special projects as assigned Conducts all business activities in accordance with BH HSE policies, Legal Compliance requirements and BH Core Values Qualifications/Requirements: HND or recognized Apprenticeship in mechanical, electrical or electronic discipline is essential Basic knowledge of drilling and completion techniques and drilling/work over rig operations is preferred but not essential. Basic knowledge of Fibre Optics is advantageous Ability to work well and communicate well with others Willingness to travel, often at short notice to site or offshore Desired Characteristics: Ability to work well and communicate well with others. Locations: Aberdeen, Scotland · This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more
VAC-67102 Our client is looking for Field Service Technician to work around the South Yorkshire As the Technician, you will: Mechanical repairs Installation of processing equipmentt Fault finding Pumps, Compressors, Valves, Pressure system Appropriate qualifications such as NVQ L3 or City & Guilds or Apprenticeship
29 Jan, 2020
Full Time
VAC-67102 Our client is looking for Field Service Technician to work around the South Yorkshire As the Technician, you will: Mechanical repairs Installation of processing equipmentt Fault finding Pumps, Compressors, Valves, Pressure system Appropriate qualifications such as NVQ L3 or City & Guilds or Apprenticeship
CYLINDER TECHNICIAN Responsibilities and Authorities To perform the duties of the position according to documented Procedures and Work Instructions. To be aware of Quality Assurance in all daily work activities and to follow the rules of prevention. To report all non-conformances and problems to your Supervisor on a Non-conformance And Corrective Action Report. To not accept non-conformance and poor workmanship from fellow employees and your direct supplier. To be aware of relevant Company Safety Requirements and to perform all duties in accordance with these requirements. To be aware of relevant Company Environmental Requirements and to perform duties in accordance with these requirements. To stop or attempt to stop any recognised unsafe or environmentally irresponsible practice. Qualifications Current driving licence (preferred). Possess a current forklift licence. 4 Standard Grades (inc. Math & English) Main Duties Booking in and dispatching of samples accordance with documented procedures. Cleaning and maintaining cylinders for laboratory and offshore use. To perform sample transfers as required. To respect and protect company and client confidentiality at all times. To fully complete all worksheets, data forms, records and administrative records, calibration and maintenance documentation, time sheets and service documents legibly, and to distribute or file these in the appropriate location. Performs other duties as and when required.
29 Jan, 2020
Full Time
CYLINDER TECHNICIAN Responsibilities and Authorities To perform the duties of the position according to documented Procedures and Work Instructions. To be aware of Quality Assurance in all daily work activities and to follow the rules of prevention. To report all non-conformances and problems to your Supervisor on a Non-conformance And Corrective Action Report. To not accept non-conformance and poor workmanship from fellow employees and your direct supplier. To be aware of relevant Company Safety Requirements and to perform all duties in accordance with these requirements. To be aware of relevant Company Environmental Requirements and to perform duties in accordance with these requirements. To stop or attempt to stop any recognised unsafe or environmentally irresponsible practice. Qualifications Current driving licence (preferred). Possess a current forklift licence. 4 Standard Grades (inc. Math & English) Main Duties Booking in and dispatching of samples accordance with documented procedures. Cleaning and maintaining cylinders for laboratory and offshore use. To perform sample transfers as required. To respect and protect company and client confidentiality at all times. To fully complete all worksheets, data forms, records and administrative records, calibration and maintenance documentation, time sheets and service documents legibly, and to distribute or file these in the appropriate location. Performs other duties as and when required.
Role Summary: The Field Service Engineer provides offshore and onshore support to customers and BHGE for installation, maintenance, repair, operation and decommissioning of Subsea equipment and services. Essential Responsibilities: Perform on-site installation and decommissioning of BHGE systems and equipment Provide technical instruction and assistance to customer representatives regarding installation and decommissioning at customer's sites Develop and further expand technical knowledge and expertise, currently recognized industry standards for engineering ability Maintain knowledge of applicable BHGE product lines Plan, prepare and/or instruct both internal and external training programs as required, to impart and perpetuate field engineering and/or product knowledge in area of specialization Perform administrative functions; such as writing technical reports, ordering materials, securing quotations, preparing job status reports, reports to customers, time sheet and expense sheets on a complete timely, and thorough basis Maintain knowledge of company reporting systems Provide leadership and technical direction to customers and team members Maintain strong safety mindset to ensure the executed work reflects the technical requirements within GE safety standards Ability to troubleshoot and react to fault resolution challenges Ability to work alone or within a team whilst being supervised remotely is an essential characteristic Qualifications/Requirements: Bachelor's degree from an accredited university or college or equivalent experience Relevant A Levels or NVQs essential Experience in a Subsea Field Services Engineer role - specifically Controls, Completions and/or Wellheads Willingness and ability to travel 100% of the time at short notice - this is an ad hoc role and flexibility is essential Must have a valid driver's license Applications from job seekers who require sponsorship to work in the UK are welcome and will be considered alongside all other applications. However, non-EU/EEA candidates may not be appointed to a post if a suitably qualified, experienced and skilled EU/EEA candidate is available to take up the post, as the employing body is unlikely, in these circumstances, to satisfy the Resident Labour Market Test. For further information please visit the UK Border Agency website Desired Characteristics: Computer literate - MS Office and ability to learn and use GRID and other business systems Ability to work effectively with minimum supervision Strong customer service mindset Prior field engineering experience Strong organizational skills Prior project management experience Strong oral and written communication skills Strong interpersonal and leadership skills Locations: Aberdeen, Scotland, UK This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more
29 Jan, 2020
Full Time
Role Summary: The Field Service Engineer provides offshore and onshore support to customers and BHGE for installation, maintenance, repair, operation and decommissioning of Subsea equipment and services. Essential Responsibilities: Perform on-site installation and decommissioning of BHGE systems and equipment Provide technical instruction and assistance to customer representatives regarding installation and decommissioning at customer's sites Develop and further expand technical knowledge and expertise, currently recognized industry standards for engineering ability Maintain knowledge of applicable BHGE product lines Plan, prepare and/or instruct both internal and external training programs as required, to impart and perpetuate field engineering and/or product knowledge in area of specialization Perform administrative functions; such as writing technical reports, ordering materials, securing quotations, preparing job status reports, reports to customers, time sheet and expense sheets on a complete timely, and thorough basis Maintain knowledge of company reporting systems Provide leadership and technical direction to customers and team members Maintain strong safety mindset to ensure the executed work reflects the technical requirements within GE safety standards Ability to troubleshoot and react to fault resolution challenges Ability to work alone or within a team whilst being supervised remotely is an essential characteristic Qualifications/Requirements: Bachelor's degree from an accredited university or college or equivalent experience Relevant A Levels or NVQs essential Experience in a Subsea Field Services Engineer role - specifically Controls, Completions and/or Wellheads Willingness and ability to travel 100% of the time at short notice - this is an ad hoc role and flexibility is essential Must have a valid driver's license Applications from job seekers who require sponsorship to work in the UK are welcome and will be considered alongside all other applications. However, non-EU/EEA candidates may not be appointed to a post if a suitably qualified, experienced and skilled EU/EEA candidate is available to take up the post, as the employing body is unlikely, in these circumstances, to satisfy the Resident Labour Market Test. For further information please visit the UK Border Agency website Desired Characteristics: Computer literate - MS Office and ability to learn and use GRID and other business systems Ability to work effectively with minimum supervision Strong customer service mindset Prior field engineering experience Strong organizational skills Prior project management experience Strong oral and written communication skills Strong interpersonal and leadership skills Locations: Aberdeen, Scotland, UK This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more
About Us: At Baker Hughes, we are transforming the future of energy. With operations in over 120 countries, we are developing and deploying industry-leading technologies and services to take energy forward. For more than a century, our inventions have revolutionized energy. Today, we are bringing our expertise to make oil and gas safer, cleaner, and more efficient. Our people are the trusted experts, relied on to solve customer challenges big and small. We invest in the health and well-being of our workforce, train and reward talent, and develop leaders at all levels to bring out the best in each other. We believe in creating an environment of diversity and inclusion, without bias. We know we are better when all of our people are developed, engaged, and able to bring their whole authentic selves to work. We're makers, inventors, and leaders who aren't afraid of the tough challenges. We believe pushing boundaries will help to lead the way for a new energy future. Role Summary: Bently Nevada is a leading global supplier of products and services for assessing and ensuring the mechanical and thermodynamic health of industrial equipment. The company maintains nearly 100 offices in the principal industrial centers of 43 countries, serving a broad base of more than 25,000 customers in the power generation, petrochemical, and numerous other industries. Bently Nevada is part the BHGE Oil & Gas business. Bently Nevada Supporting Service Agreements (SSA) are a key business growth area in Aberdeen and center around the installation, commissioning and optimization of the System 1 and Smart Signal software platforms, to deliver remote monitoring, diagnostics and consultancy. Essential Responsibilities: Primary services point of contact within the customer's organisation for the BHGE Bently Nevada product line. · Develop and refine the System 1 installations to be best in class for 1st line remote monitoring and diagnostics of covered assets. · Define contract Key Performance Indicators (KPI's) in conjunction with Sales Manager/Customer. · Implement / update SSA project schedule into service team schedule. · Ensure all aspects of SSA are executed in accordance with contract commitments (including KPI status and customer satisfaction). · Carry out SSA contract review meetings to schedule (minimum quarterly). · Complete / update a quarterly SSA review scorecard and review with regional SSA operations leader. · Lead quarterly meetings with relevant salesperson to discuss SSA execution, ROI and future opportunities. · Presentation of ROI case histories to senior customer personnel, covering EHS, Production and Maintenance impact. · · Review and report monthly SAP financial performance for SSA project (cost / margin). · Continuously develop SSA execution strategy to improve quality, duration of contract deliverables and variable cost productivity. · On-going review of Condition Monitoring techniques to identify opportunities for improvement using current / new technology or by developing processes. · Identify upsell opportunities for growth of SSA scope and other hardware, software and service pull-through sales. · Training and mentoring of less senior/experienced SSA Site Leads and MDS Engineers with technical development plans in conjunction with the Western Europe MDS Technical Leader. · Assist in development of and delivery of MDS training courses for internal engineers and customers Qualifications/Requirements: A 4-year college degree is required. A BS in Mechanical Engineering or equivalent is needed. Multiple years' experience in machinery diagnostics and condition based maintenance. VA ISO Level II certified. Demonstrate confidence and assurance dealing with people. Excellent written and oral communication skills to convey technical concepts to business and technical personnel. Ability to work under pressure. Project Management Skills. Strong computer skills using MS Office software. "Hands-on approach". Ability to read, interprets, and understands mechanical prints. Knowledge of rotating machinery operation and controls systems. Knowledge of O&G Upstream/Downstream processes. Knowledge of machinery protection and management systems. Desired Characteristics: Knowledge of Bently Nevada products and services. Demonstrable experience of vibration analysis or 10 years industry (energy and/or oil & gas) experience. MSc in an engineering discipline is preferred Basic familiarity with computer network systems. Membership in a technical society such as IMechE, BINDT or Vibration Institute. Advert Start date: 11th December 2019 Closing date: 17th January 2020 Salary: Competitive Locations: Aberdeen This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more Career Level Experienced
29 Jan, 2020
Full Time
About Us: At Baker Hughes, we are transforming the future of energy. With operations in over 120 countries, we are developing and deploying industry-leading technologies and services to take energy forward. For more than a century, our inventions have revolutionized energy. Today, we are bringing our expertise to make oil and gas safer, cleaner, and more efficient. Our people are the trusted experts, relied on to solve customer challenges big and small. We invest in the health and well-being of our workforce, train and reward talent, and develop leaders at all levels to bring out the best in each other. We believe in creating an environment of diversity and inclusion, without bias. We know we are better when all of our people are developed, engaged, and able to bring their whole authentic selves to work. We're makers, inventors, and leaders who aren't afraid of the tough challenges. We believe pushing boundaries will help to lead the way for a new energy future. Role Summary: Bently Nevada is a leading global supplier of products and services for assessing and ensuring the mechanical and thermodynamic health of industrial equipment. The company maintains nearly 100 offices in the principal industrial centers of 43 countries, serving a broad base of more than 25,000 customers in the power generation, petrochemical, and numerous other industries. Bently Nevada is part the BHGE Oil & Gas business. Bently Nevada Supporting Service Agreements (SSA) are a key business growth area in Aberdeen and center around the installation, commissioning and optimization of the System 1 and Smart Signal software platforms, to deliver remote monitoring, diagnostics and consultancy. Essential Responsibilities: Primary services point of contact within the customer's organisation for the BHGE Bently Nevada product line. · Develop and refine the System 1 installations to be best in class for 1st line remote monitoring and diagnostics of covered assets. · Define contract Key Performance Indicators (KPI's) in conjunction with Sales Manager/Customer. · Implement / update SSA project schedule into service team schedule. · Ensure all aspects of SSA are executed in accordance with contract commitments (including KPI status and customer satisfaction). · Carry out SSA contract review meetings to schedule (minimum quarterly). · Complete / update a quarterly SSA review scorecard and review with regional SSA operations leader. · Lead quarterly meetings with relevant salesperson to discuss SSA execution, ROI and future opportunities. · Presentation of ROI case histories to senior customer personnel, covering EHS, Production and Maintenance impact. · · Review and report monthly SAP financial performance for SSA project (cost / margin). · Continuously develop SSA execution strategy to improve quality, duration of contract deliverables and variable cost productivity. · On-going review of Condition Monitoring techniques to identify opportunities for improvement using current / new technology or by developing processes. · Identify upsell opportunities for growth of SSA scope and other hardware, software and service pull-through sales. · Training and mentoring of less senior/experienced SSA Site Leads and MDS Engineers with technical development plans in conjunction with the Western Europe MDS Technical Leader. · Assist in development of and delivery of MDS training courses for internal engineers and customers Qualifications/Requirements: A 4-year college degree is required. A BS in Mechanical Engineering or equivalent is needed. Multiple years' experience in machinery diagnostics and condition based maintenance. VA ISO Level II certified. Demonstrate confidence and assurance dealing with people. Excellent written and oral communication skills to convey technical concepts to business and technical personnel. Ability to work under pressure. Project Management Skills. Strong computer skills using MS Office software. "Hands-on approach". Ability to read, interprets, and understands mechanical prints. Knowledge of rotating machinery operation and controls systems. Knowledge of O&G Upstream/Downstream processes. Knowledge of machinery protection and management systems. Desired Characteristics: Knowledge of Bently Nevada products and services. Demonstrable experience of vibration analysis or 10 years industry (energy and/or oil & gas) experience. MSc in an engineering discipline is preferred Basic familiarity with computer network systems. Membership in a technical society such as IMechE, BINDT or Vibration Institute. Advert Start date: 11th December 2019 Closing date: 17th January 2020 Salary: Competitive Locations: Aberdeen This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more Career Level Experienced
Role Summary: The Lead Product Development Engineer is responsible for the execution of the technology strategic plan for either product design improvements or new product initiatives (NPI) employing conventional design techniques. Essential Responsibilities: In addition to the day to day responsibilities related to product development and engineering work programs, the successful candidate will also:- Ensure that Product Development, Quality, HSE and Engineering processes are followed for all aspects of the NPI program iaw with BHGE, Industry and (where applicable) client standards. Support the completion of all technical deliverables within a given NPI program. This includes ensuring that the production, checking and, where required, approval of all deliverables is iaw schedule requirements. Required to provide engineering expertise within a technology development program. Assessing commercial and contractual aspects/risk for outsourced activities, ensuring completion of all applicable design reviews in relation to specific program schedules and agreed toll gates and in leading idea generation activities to support identification of development and NTI opportunities. Required to develop, define and, where applicable, check detailed work package planning and resource schedules to feed in to high level product development program plan. Support the timely release of Product Development information for incorporation into design guidelines and/or design tools by the responsible engineers. Lead technical discussions, clarifications and qualifications with 3rd party IVA and, where applicable, act as the technical POC. Any other duties as identified by Product Development & Validation Leader Qualifications/Requirements: A university degree in an Engineering related subject; Master's degree or equivalent Minimum 3 to 4 years' experience at an Engineer level functioning with an increased level of specialization, practice and responsibility plus development of others and demonstrating leadership responsibilities. Engineer/scientist working towards chartered status with a recognized institution. Desired Characteristics: Ability to work to a schedule and conduct work, which may involve conflicting project requirements. Proven attention to detail, with excellent analytical, critical thinking and problem solving. Good organisation skills with the ability to directly inform and instruct Engineers, Technicians and other employees of specific engineering and HSE requirements. Have credibility and be well networked for influence ... able to open doors. Proficiency in software applications MS Word, PowerPoint, Excel, and Outlook. Self-motivated, self-starter capable of remaining flexible to changing work priorities. Excellent communication skills (interpersonal, oral and written). Effective at managing multiple priorities under tight deadlines, with the ability to bring assignments to a successful completion. Locations: · Newcastle This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more
29 Jan, 2020
Full Time
Role Summary: The Lead Product Development Engineer is responsible for the execution of the technology strategic plan for either product design improvements or new product initiatives (NPI) employing conventional design techniques. Essential Responsibilities: In addition to the day to day responsibilities related to product development and engineering work programs, the successful candidate will also:- Ensure that Product Development, Quality, HSE and Engineering processes are followed for all aspects of the NPI program iaw with BHGE, Industry and (where applicable) client standards. Support the completion of all technical deliverables within a given NPI program. This includes ensuring that the production, checking and, where required, approval of all deliverables is iaw schedule requirements. Required to provide engineering expertise within a technology development program. Assessing commercial and contractual aspects/risk for outsourced activities, ensuring completion of all applicable design reviews in relation to specific program schedules and agreed toll gates and in leading idea generation activities to support identification of development and NTI opportunities. Required to develop, define and, where applicable, check detailed work package planning and resource schedules to feed in to high level product development program plan. Support the timely release of Product Development information for incorporation into design guidelines and/or design tools by the responsible engineers. Lead technical discussions, clarifications and qualifications with 3rd party IVA and, where applicable, act as the technical POC. Any other duties as identified by Product Development & Validation Leader Qualifications/Requirements: A university degree in an Engineering related subject; Master's degree or equivalent Minimum 3 to 4 years' experience at an Engineer level functioning with an increased level of specialization, practice and responsibility plus development of others and demonstrating leadership responsibilities. Engineer/scientist working towards chartered status with a recognized institution. Desired Characteristics: Ability to work to a schedule and conduct work, which may involve conflicting project requirements. Proven attention to detail, with excellent analytical, critical thinking and problem solving. Good organisation skills with the ability to directly inform and instruct Engineers, Technicians and other employees of specific engineering and HSE requirements. Have credibility and be well networked for influence ... able to open doors. Proficiency in software applications MS Word, PowerPoint, Excel, and Outlook. Self-motivated, self-starter capable of remaining flexible to changing work priorities. Excellent communication skills (interpersonal, oral and written). Effective at managing multiple priorities under tight deadlines, with the ability to bring assignments to a successful completion. Locations: · Newcastle This is your opportunity to learn more, do more, live the career you have imagined and be part of a truly diverse organization Baker Hughes is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more
Opportunity for an experienced Offshore worker with an Engineering or Scientific Degree or experienced Offshore Oil Chemist to work within Oilfield Production Chemistry. About the Role You will be a key member of the Operations team providing Analytical data on production processes and maintaining Chemical treatments for production rates and process integrity. You will: - Provide sampling and Lab analysis of offshore oil samples - Produce technical reports - Manage chemical and laboratory use and stock - Maintenance of laboratory equipment - Ensuring compliance with the Operator's offshore procedures including environmental regulations Must have: - Previous Offshore experience - Scientific/ Engineering background We can only accept applications from UK / EU Visa holders. Chemical training and offshore certification can be provided where required. Please apply to Paul Stanbridge at Fleet Oil Ltd, with a copy of your CV for consideration.
29 Jan, 2020
Full Time
Opportunity for an experienced Offshore worker with an Engineering or Scientific Degree or experienced Offshore Oil Chemist to work within Oilfield Production Chemistry. About the Role You will be a key member of the Operations team providing Analytical data on production processes and maintaining Chemical treatments for production rates and process integrity. You will: - Provide sampling and Lab analysis of offshore oil samples - Produce technical reports - Manage chemical and laboratory use and stock - Maintenance of laboratory equipment - Ensuring compliance with the Operator's offshore procedures including environmental regulations Must have: - Previous Offshore experience - Scientific/ Engineering background We can only accept applications from UK / EU Visa holders. Chemical training and offshore certification can be provided where required. Please apply to Paul Stanbridge at Fleet Oil Ltd, with a copy of your CV for consideration.
ASA Recruitment are currently recruiting for a Technical Tools Specialist for their Aberdeen based client. Responsible for the successful execution of offshore operations in collaboration with onshore field support services team. Responsible for planning, preparation, mobilisation, execution and demobilisation of all equipment and services. Responsibilities : * Perform work safely, efficiently and compliant of both tools and customer requirements. * Safe and proactive behaviour. Active use of four point check, toolbox talk, interventions and proactive reporting. * Check and prepare equipment at customer site, ensuring all details of the job are accurate and correct. * Perform service and installation of tools product porfolio according to quality control plans and best practice procedures. * Prepare necessary job reports and documentation for all toll installation and offshore activities including run records. * On occasion required to be in the workshop to help prepare, test and mobilise equipment for offshore operations, including carrying out check list drawings of tools prior to shipment. * Required to work offshore ad-hoc with a potential to travel at short notice. Qualifications : * Proven experience of offshore operations experience with a proven track record in successful job execution. * Understanding of downhole hydraulics and ability to carry out hydraulic calculations. * Excellent communication and reporting skills. * Strong ability to work alone and with others. * Educated to degree level or equivalent. But a strong background and experience of hands on offshore experience may compensate for lack of engineering degree. * A willingness to be proactive and learn new up and coming technologies. If interested in this exciting opportunity. Please send CV. ASA Recruitment is one of Scotland's largest independent multi-sector recruitment agencies. We specialise in providing effective tailored solutions for permanent, contract and temporary employment requirements for our Clients and Candidates. We are members of the REC and are ISO certified. YOU SEEK WE FIND
29 Jan, 2020
Full Time
ASA Recruitment are currently recruiting for a Technical Tools Specialist for their Aberdeen based client. Responsible for the successful execution of offshore operations in collaboration with onshore field support services team. Responsible for planning, preparation, mobilisation, execution and demobilisation of all equipment and services. Responsibilities : * Perform work safely, efficiently and compliant of both tools and customer requirements. * Safe and proactive behaviour. Active use of four point check, toolbox talk, interventions and proactive reporting. * Check and prepare equipment at customer site, ensuring all details of the job are accurate and correct. * Perform service and installation of tools product porfolio according to quality control plans and best practice procedures. * Prepare necessary job reports and documentation for all toll installation and offshore activities including run records. * On occasion required to be in the workshop to help prepare, test and mobilise equipment for offshore operations, including carrying out check list drawings of tools prior to shipment. * Required to work offshore ad-hoc with a potential to travel at short notice. Qualifications : * Proven experience of offshore operations experience with a proven track record in successful job execution. * Understanding of downhole hydraulics and ability to carry out hydraulic calculations. * Excellent communication and reporting skills. * Strong ability to work alone and with others. * Educated to degree level or equivalent. But a strong background and experience of hands on offshore experience may compensate for lack of engineering degree. * A willingness to be proactive and learn new up and coming technologies. If interested in this exciting opportunity. Please send CV. ASA Recruitment is one of Scotland's largest independent multi-sector recruitment agencies. We specialise in providing effective tailored solutions for permanent, contract and temporary employment requirements for our Clients and Candidates. We are members of the REC and are ISO certified. YOU SEEK WE FIND
We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry. JOB DESCRIPTION: Under general supervision, provides well site service to customers. Applies content learned through the formal training program in fluids chemistry, volume and hydraulics calculations, routine and specialized testing, separation equipment theory and application, and well site service delivery. Works directly with both fluids and equipment supervisors and technical professionals. Demonstrates advanced knowledge of company products and services, rig operations, and fluids, separation, and waste management technologies and related processes. Performs in a professional manner as a Halliburton representative, maintaining good working relationship with operator's representative and rig personnel. Conducts and interprets results of routine and specialized testing in order to provide technical solutions. Conducts the operation of some separation and waste management equipment and demonstrates understanding of how they affect overall fluid performance. Demonstrates advanced ability to adequately prepare and track inventory of palletized and bulk products and equipment spares at the rig site based on the drilling program and anticipated conditions. Demonstrates advanced ability to operate, maintain and optimize equipment including testing, separation, and waste management equipment. Complies with health, safety and environment regulations in all aspects of job performance. Mentors and helps in the development of junior employees. High school diploma or equivalent required. Completion of a Bachelor's Degree in STEM (Science, Technology, Engineering and Mathematics) or other related Bachelor's Degree program is preferred. Position also requires completion of Baroid Core Training Course at Halliburton or other industry recognized program and fluids and separation equipment experience. Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation . Location Howemoss Crescent, Aberdeen, Aberdeen, AB21 0GN, United Kingdom Job Details Requisition Number: 81484 Experience Level: Experienced Hire Job Family: Operations Product Service Line: Baroid Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience.
29 Jan, 2020
Full Time
We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry. JOB DESCRIPTION: Under general supervision, provides well site service to customers. Applies content learned through the formal training program in fluids chemistry, volume and hydraulics calculations, routine and specialized testing, separation equipment theory and application, and well site service delivery. Works directly with both fluids and equipment supervisors and technical professionals. Demonstrates advanced knowledge of company products and services, rig operations, and fluids, separation, and waste management technologies and related processes. Performs in a professional manner as a Halliburton representative, maintaining good working relationship with operator's representative and rig personnel. Conducts and interprets results of routine and specialized testing in order to provide technical solutions. Conducts the operation of some separation and waste management equipment and demonstrates understanding of how they affect overall fluid performance. Demonstrates advanced ability to adequately prepare and track inventory of palletized and bulk products and equipment spares at the rig site based on the drilling program and anticipated conditions. Demonstrates advanced ability to operate, maintain and optimize equipment including testing, separation, and waste management equipment. Complies with health, safety and environment regulations in all aspects of job performance. Mentors and helps in the development of junior employees. High school diploma or equivalent required. Completion of a Bachelor's Degree in STEM (Science, Technology, Engineering and Mathematics) or other related Bachelor's Degree program is preferred. Position also requires completion of Baroid Core Training Course at Halliburton or other industry recognized program and fluids and separation equipment experience. Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation . Location Howemoss Crescent, Aberdeen, Aberdeen, AB21 0GN, United Kingdom Job Details Requisition Number: 81484 Experience Level: Experienced Hire Job Family: Operations Product Service Line: Baroid Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience.
